MAG-STB
Easy MAG Box IPTV Setup Tutorial
**NOTE: Ensure your MAC address is registered. Before signing up, verify your MAC address in the MAC section. To find it, simply turn your MAG box over; the MAC address starting with 00:1A:79: is located on the back of your device. Setup typically takes about 5 minutes.
Step 1: Access the Settings Menu
1: Power on your MAG device.
2: As the box loads, the main portal screen will appear.
3: Using your remote, press the “SETUP/SET” button or navigate to the “Settings” option.
Step 2: Configure System Settings
1: Select “System Settings” from the menu.
2: Click on “Servers” to proceed.
Step 3: Set Up the Portal
1:Choose the “Portals” option.
Step 4:
1: In the “Portal 1 Name” field, enter a descriptive name, such as “IPTV”.
2: In the “Portal 1 URL” field, enter the portal address provided by your IPTV service provide.
Important: You must share your MAG device’s MAC address (located on the back of the device) with your IPTV provider. This is essential for activation.
Step 5: Save and Exit
1: After entering the portal details, press “OK” to save the settings.
2: Pressing the “EXIT” button on your remote control for Exit the settings menu
3: Navigate to the “General” settings option.
Step 6: Configure the NTP Server
1: In the “NTP Server” field, enter one of the following addresses based on your location:
North America: pool.ntp.org or us.pool.ntp.org
2: Press “OK” to save your changes.
Step 7: Restart the Portal
1: Press the “EXIT” button twice to return to the main menu.
2: Restart your MAG device to load the portal.
Once these steps are complete, your MAG device will connect to the IPTV service, and you’re ready to enjoy live TV, movies, and more!
For uninterrupted streaming, ensure your MAG device is connected to a high-speed internet connection.
Keep your MAG device’s firmware up to date to benefit from the latest features and improvements.
Customize the resolution and aspect ratio for the best viewing experience.
If your MAG 250, 254, or 256 does not load the IPTV portal, it could be due to memory limits caused by a large channel list. If you see the message “Error loading pages,” try reducing the number of channels. Also, ensure that your MAG box is properly connected to the internet. Go to Inner Portal Settings > System Settings > Network, change your network setting from Auto-DHCP to Auto-DHCP/Manual DNS, and enter 8.8.8.8 in the manual DNS field. Save your settings, reboot the device, and try loading the portal again. If the problem continues, performing a factory reset may help resolve the issue.
Useful Links
Our Services
Official info:
Copyright © 2022 Cloudy Stream | All Rights Reserved